5000V DC High Voltage Transducer

HOME > PRODUCT > New Product

  • ​ENTRIES:Part Number GuideData SheetFAQ
  • This product is a DC high voltage isolation transducer. It can be used to measure high DC voltage up to 5000Vdc, with full isolation between input, output and power supply, high isolation voltage, safe and reliable. This product is with the advantage of high precision, fast response, simple installation etc. It can be widely used in high DC voltage signal real-time detection or monitoring, data acquisition, industrial control, PLC monitoring and control and other automatic control system.


    Data Sheet

    * Accuracy: class 0.2;        

    * Load capacity: load≥2KΩ(voltage output) , load≤250Ω(current output);

    * Temperature drfit: ≤100ppm/℃;

    * Isolation voltage:

       Between the input signal and the output signal, isolation voltage is 10KVDC,the leakage current<1mA, lasts for 60 seconds;

       Between the input signal and the power supply, isolation voltage is 10KVDC,the leakage current<1mA, lasts for 60 seconds;

       Between the output signal and the power supply, isolation voltage is 6KVDC,the leakage current<1mA, lasts for 60 seconds;

    * Response timeL: ≤300 uS ;

    * Rated power consumption: <2.5W;

    * Surge impact immunity:

       input port four-level 6000V(L-N/2Ω/intergrated wave)

       power port four-level 6000V(L-N/2Ω/intergrated wave)

       analog I/O port three-level 6000V(L-N/40Ω/intergrated wave)

    * Input overload capacity: maximum input voltage is 8KV, apply one second repeats 10 times,interval    10S;

    * Operating condition: temperature:-20~70℃, humidity: ≤90%(no dew).


    blob.png

    MSK.jpg

    MSK product case style


    SK.JPG

    SK case style installation dimensions

    blob.png

                                                                      Wiring diagram

    High detection voltage: special pressure-resistant component is used for the input terminal,can sample up to 5000V DC voltage.

    Wide power supply: product input auxiliary power supply is wide power supply,makes the product can work normally within the power supply voltage range of 12V ~ 36VDC.

    High isolation voltage: input,power supply,output are fully isolation.

    isolation voltage between the input signal and the output signal is 10KVDC;

    isolation voltage between the input signal and the power supply is 10KVDC;

    isolation voltage between the output signal and the power supply is 6KVDC;

    High precision,low temperature drfit: linear and long-term stability are guaranteed within the precision range.

    Easy installation: uses the standard DIN rail mounting and screw mounting.


    Copyright© 2019 SHENZHEN SENSOR ELECTRONIC TECHNOLOGY CO., LTD粤ICP备05079934号-9