This device is a 1-phase AC current offside alarm transducer, produced with the use of input, output and power supply isolation. The input signal is a single AC voltage (current) signal, the output signal is the relay passive contact switch (or OC door). The product is mainly used for a variety of electrical control system security protection and other necessary protection devices.
Test conditions: auxiliary power: +24V, room temperature: 25℃
Input Range: 0 ~ 1 ~ 500VAC, 0 ~ 0.5 ~ 300AAC
Output: relay output, OC gate output;
Threshold adjustment: customizable;
Hysteresis: -5 ~ -30% (input threshold) (default is 20%);
Power supply: +12VDC, +24VDC, 90V～260V(AC/DC);
Load capacity: 2A / 250VAC or 30VDC (relay output);
RL = 2K, VCC = 24VDC (OC gate output);
Temperature drift: ≤300ppm/℃;
Isolation voltage: ≥2500 V DC;
Response time: ≤300mS;
Rated power consumption: ≤1.1W;
Output ripple: none;
Frequency range: 45~65Hz（up to 5K,please specify when ordering）;
Surge impact immunity: power, input port four level 4KV (L-N / 2Ω / integrated wave);
Input overload capacity: Voltage: 2 times the nominal value, for 1 second interval 10 seconds repeat 10 times; Current: 2 times the nominal value and less than 10A, 5 times a second;
Operating temperature: -10 ~ 60°C; humidity: ≤95 %( no dew);
Storage temperature: -55 ~+65°C; humidity: ≤95 % (no dew).
CE-VJ03 product's connection diagram with relay switch output
CE-VJ03 product's connection diagram with OC gate output
CE-IJ03 product's connection diagram with relay switch output
CE-IJ03 product's connection diagram with OC gate output
Product input port, power port can withstand 4KV surge impact, anti-interference ability, safe and reliable;
With passive relay contacts, OC door and other ways of output, so that a wider range of products for a variety of security systems.
Standard rail and screw installation, simple and reliable .