Single Phase AC Current Transducer
This product is a pin-type single phase AC current isolation transducer with electromagnetic isolation principle. It is designed to measure and monitor average RMS AC current, then produce a standard signal such as 4-20mADC, 0-5VDC and so on. It can be widely used in telecommunications, electricity, railways, industrial industries and other fields.
* Test condition: auxiliary power supply:12VDC, room temperature:25℃.
* Input range: 0.1AAC~1AAC;
* Output: 0～5VDC;
* Auxiliary power supply:12VDC;
* Accuracy: class 0.5;
* Load capacity: load≥2KΩ;
* Temperature drfit: ≤200ppm/℃;
* Isolation voltage: ≥2500 V DC;
* Response time: ≤300 mS;
* Rated power consumption: 0.4W;
* Output ripple: <10mV;
* Frequency range: 45Hz-65Hz;
* Surge impact immunity:
Power port three-level ±0.5KV(L-N/2Ω/intergrated wave)
Analog I/O port three-level ±0.5KV(L-N/40Ω/intergrated wave) ;
* Impulse immunity: input/power port ±2KV, analog I/O port ±1KV;
* Input overload capacity: 20 times of the measured current norminal value( maximum is 500A, apply one second repeat 5 times, interval 300S);
* Operating condition: temperature:-10~60℃; humidity: ≤95% (no dew);
* Storage condition: temperature:-55~+65℃; humidity: ≤95% (no dew).
MH1 case style
H1 case style installation dimensions
Wiring diagram
Pin type mounting method, convenient to install on PCB board, reliable and firm installation.
Small size, easy to centralize installation,save space.
High precision,low temperature drfit,high reliability.