1-element DC current transducer

HOME > Current > DC Current Transducer

  • ​ENTRIES:Part Number GuideData SheetFAQ
  • This device is a DC current measurement isolation transducer. It is used hall measurement principle, perforated input mode, and with a very high isolation pressure function. The input DC current signal can be converted to linear standard DC signal output. It can be widely used in computer field data acquisition, industrial control, PLC control and other automated control system.


    Data Sheet

    Input range: DC 0~10A-300A;
    Output: 0-5V, 0-10V, 0-20mA, 4-20mA, 0-5KHz;
    Auxiliary Power: DC 12V, 15V, 24V or DC 11.5V-26V, wide power supply;
    Accuracy: 1.0;
    Load capacity: voltage output load ≥ 2KΩ,
    current output load ≤ 250Ω;
    Temperature drift: ≤500PPm/°C;
    Isolation voltage: 2500 V DC;
    Response time: ≤200 mS;
    Rated power consumption: ≤800mW;
    Output ripple: ≤15mV;   
    Frequency range: none;
    Surge impact immunity: power supply port four 4000V;
                           output port three 2000V;
    Burst immunity: None;
    Input overload capacity: 20 times the nominal value of the measured current (maximum 500A, applied 1 second);
    Operating temperature: -10~60°C;
    Storage temperature: -40~70°C.

    11.png

    ES3.jpg

    ES3 case

    12.png

    Installation dimensions


    13.png

                                                                           Wiring diagram of voltage output

                   

                                                                            14.png

                                                                           Wiring diagram of current output

    Features:
    High stability, low temperature drift;
    High reliability, strong surge voltage suppression;
    mall size, easy to install.

    Related Products

    Copyright© 2017 SHENZHEN SENSOR ELECTRONIC TECHNOLOGY CO., LTD粤ICP备05079934号-9