Single phase AC voltage transducer
This product is a pin-type single phase AC voltage isolation transducer, used electromagnetic isolation principle, isolated transmit the input AC voltage signal into a standard analog output voltage signal to achieve the AC voltage signal measurement and monitoring. Its input and output of the product have very good linearity. It can be widely used in communications, electricity, railways, industrial monitoring and control and other fields.
Test conditions: power supply: 12VDC, room temperature: 25℃.
Input range: 0.1VAC~1VAC~300VAC;
Output: 0~5VDC;
Power supply: 12VDC;
Accuracy: 0.5 class;
Load capacity: load≥2KΩ;
Temperature drift: ≤200ppm/℃;
Isolation voltage: ≥2500 VDC;
Response time: ≤100 mS;
Rated power consumption: 0.4W;
Output ripple: <10mV;
Frequency range: 45Hz-65Hz;
Surge impact immunity:
Power port level ± 0.5KV (L-N/2Ω/integrated wave)
Analog I/O port level ±0.5KV (L-N/40Ω/integrated wave);
Impulse immunity: input / power port ± 2KV
Analog I /O port ± 1KV;
Input overload capacity: 2 times the value of the measured value;
Operating temperature: -10~ 60°C; humidity: ≤95% (no dew);
Storage temperature: -55 ~+65°C; humidity: ≤95% (no dew).
MH1 case outline
H1 case installation dimension
CE-VJ03-32MH1 wiring diagram with current output
Plug-type installation, easy to install on the PCB board, reliable and secure installation;
Small size, easy installation, save space;
High precision, low temperature drift, high reliability.