Notice to user

• Please check the part number of the products carefully in accordance with packing list and product labels before apply them in your system.
  
  
• Make sure to connect the input signals, outputs and POWER SOURCE correctly and properly.
  
  
• POWER SOURCE: accuracy 5% or greater, ripple Vpp =0.4%.
  
  
• Conductive dust and gases corroding metal may damage the isolation. They are hazardous to the product. Don't operate in that environment.
  
  
• Please screw the terminal tightly before you measure the output signal on the output terminals with the probes of instrument,
  
  
• The transducers should not be used in environments with strong electromagnetic interference. Standard precautions such as shielding the input and/or output lines should be observed. All lines should be kept as short as possible. If several transducers are used together, keep a minimum of 10 mm space between each unit. A 35mm (width) track is to be used for DIN rail mounting with M3 screws for surface mounting.
  
  
• The zero adjusting and the accuracy calibration for the products have been made before delivery. Please don't adjust it. Contact the company if field adjustments are required.
  
  
• Please don't remove any labels on the products.