Self Power 1-phase Voltage Transducer
Specifications:
Part number |
Output |
Isolation Voltage |
Linearity Error |
Phase Deflection |
Rated Output
|
Load
|
Response Time |
Overload Capacity |
Mounting |
CE-VJ03-10
|
Vg |
2500VDC |
≤0.2% |
35' |
0-1V |
>1MΩ |
≤15uS |
20 times
<5/sec |
Din rail / PCB /Screw |
| CE-VJ03-20 |
Ig |
0-1mA |
≤1V |
2. Part numbers:
Series |
Output |
Power Supply |
Window(mm) |
Case Style |
Accuracy |
Rated Input |
|
1：tracking voltage (Vg)
2：tracking current(Ig) |
0：none
|
M：none |
S2 |
0.5
1.0 |
10V,50V,100V,
110V,220V,250V,
380V,400V,500V,600V
|
Part Number Example: CE-VJ03-20MS2-1.0/0-400V
Description:
1-phase AC voltage transducer,Output:tracking current 0-1mA,No power supply,No aperture, Case style:S2,Accuracy:1.0,Input current:0-400V
Connections Diagram :
 
CE-VJ03 (H1 case style) CE-VJ03 (S case style)
Case Style Dimensions :
Application:
- Industrial automation engineering
- Electrical distribution system
- Process automation system
- Energy management system
- Industrial controls
- Monitor the voltage of the motors
- Monitor the secondary side of the VT
Notice:
1
、"+" which signed in the picture means the same polarity.
2、The input voltage should not be over the rated voltage. The H1 must be used with corresponding current limiting resistance.
3、If there is a meter is used to test thd output of the transducer,please make sure the accuracy of the meter is higher than the transducer.
|
Current Transducer
0-55Hz~5KHz
Service