Our leakage current transducer has the function with its output isolated from input. It can be applied to test 1 phase AC microampere or milliampere current; for example, it can be used to test lightning conductor and other electrical leakage of various electrical equipments.

Features

1. High accuracy: The error will not exceed 50uA
2. Hole-thru input: It is convenient to install.
3. High overload capacity: It can accept heavy current input which is up to 2000A and it can work in high voltage environment. Successfully avoid the weakness of wiring-type.
4. Single power supply: The transducer needs only single power supply and power supply deviating will not affect its work.
5. High stability.
1. The transducer adopts a lot of shielding measures which effectively suppress the interference to ensure the accuracy and stability.
2. The transducer has good temperature characteristics. The output drift is less than 400 ppm for every degree of temperature changes.
3. Comparative with traditional Hall Effect magnetic balance principle, the transducer has smaller zero drift features.
4. The input, output and power supply of the transducer adopt surge restraining measurement. It makes the transducer meet surge immunity class 3 of < IEC61000-4-5(GBT17626.5)>
6. High safety: Non-contact input makes its up to 35KV isolation withstand voltage (for non-naked wire). Greatly improves its safety.

Product:                　　　  1 Element AC leakage current transducer
Series:                   　　　 CE-IJ03
Rated input:                       0~0.5-100mA AC
Rated output:                     0-5VDC; 0-20mA; 4-20mA
Output ripple :                    <10mV
Accuracy:                           1.0%
Linearity range:                 0-120%
Input overload capacity:     5A AC (5 times/sec)
Response time:                   ≤300ms
Isolation:                            35KV DC/min
Operating temperature:     -20℃~+70℃

Specifications